Product ID:ART GLAZE AR700 SERIES
MSDS Date:01/01/1992
FSC:8010
NIIN:00F021491
MSDS Number: BMLXP

DUNCAN ENTERPRISES

5673 E SHIELDS AVE
FRESNO, CA 93727-7819
US

Emergency Phone: 209-445-1222

Info Phone: 209-291-4444

Preparer: CURT SATHRE

Cage: 21546

DUNCAN ENTERPRISES

FRESNO, CA 93727 US

Telephone: 209-291-4444

Cage: 21546

CADMIUM AND CADMIUM COMPOUNDS

Fraction By Weight: <7%

OSHA PEL 0.2 MG/CUM

ACGIH TLV: 0.05 MG/CUM

BARIUM COMPOUNDS

Fraction By Weight: <3%

OSHA PEL 0.5 MG/CUM

ACGIH TLV: 0.5 MG/CUM

ALKALI BOROSILICATE FRITS *93-1*

CAS: 65997-18-4

SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <8%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

LEAD COMPOUNDS

Fraction By Weight: <28%

OSHA PEL 0.05 MG/CUM

ACGIH TLV: 0.15 MG/CUM

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ABRASIVE, CAN SCRATCH EYES.
OVEREXPOSURE TO LEAD MAY CAUSE NERVOUS SYSTEM, KIDNEY, OR BONE
MARROW DAMAGE OR HARM TO THE DEVELOPING FETUS.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:WEIGHT LOSS, STOMACH CRAMPS, LOSS OF
COORDINATION, JOINT & MUSCLE PAINS.

First Aid:EYES: FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN: WASH W/SOAP &
WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting Procedures:NONE. WILL NOT BURN.

Spill Release Procedures:CLEAN UP PROPERLY W/PAPER TOWELS & A WET
SPONGE.

Handling and Storage Precautions:KEEP SEALED. KEEP OUT OF REACH
CHILDREN. AVOID USING IF PREGNANT OR CONTEMPLATING PREGNANCY.
Other Precautions:WHEN USING, DON'T EAT, DRINK, OR SMOKE. IF GLAZE
SPRAYING REGULAR BLOOD LEAD LEVEL TESTING IS ADVISABLE.

Respiratory Protection:USE NIOSH APPROVED DUST/MIST RESPIRATOR FOR LEAD
SCH AS 3M 8710 OR EQUIVALENT. USE RESPIRATOR WHEN SPRAYING.
Ventilation:LOCAL EXHAUST: RECOMMENDED. MECHANICAL (GENERAL):
RECOMMENDED WHEN SPRAYING.
Eye Protection:REQUIRED
Other Protective Equipment:IF IN THE GLAZE FORM & APPLYING BY SPRAY,
USE SPRAY BOOTH, PROTECTIVE CLOTHING
Work Hygienic Practices:WASH HANDS IMMEDIATELY AFTER USE. CLEAN SPRAY
BOOTH FILTERS OFTEN.
Supplemental Safety and Health
FRITS ARE PRODUCED FROM THE CHEMICAL REACTIONS WHICH OCCUR DURING THE
HIGH TEMPERATURE SMELTING OF VARIOUS RAW MATERIALS TO FORM A MOLTEN
GLASS. THIS GLASS IS RAPIDLY COOLED & THEN GROUND TO PRODUCE P
OWDERED FRIT. EXPOSURE TO THE HAZARDOUSINGREDIENT IF IT DISSOLVES
OUT OF THE GLASS (OCCURS VERY SLOWLY).

Boiling Pt:B.P. Text:212F
Melt/Freeze Pt:M.P/F.P Text:1800F
Spec Gravity:1.7
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED LIQUID WITH NO ODOR.

Stability Indicator/Materials to Avoid:YES

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.